Tender Schedule for Aluminium entrance door for the Office-cum-Laboratory at RCRS, Coffee Board, Chundale

Sl.No 2007 CPWD DSR ITEM NO. & PAGE No. Description Unit Qty Rate
in
Rupees		 Amount in
Rupees
1 21.1.1.2 / 337 Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS: 1285, anodised transparent or dyed to required shade according to IS: 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene, felt etc. Aluminium sections shall be smooth, rust free, straight, miitred and jointed mechanically wherver required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (Glazing and paneling to be paid for separately ) - For fixed portion. powder coated aluminium (minimum thickness of powder coating 50 microns) Kg 67.00 306.3 20522.10
2 21.1.2.2 /337 Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS: 1285, anodised trasparent or dyed to required shade according to IS: 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene, felt etc. Aluminium sections shall be smooth, rust free, straight, miitred and jointed mechanically wherver required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (Glazing and paneling to be paid for separately ) - For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making proviision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). powder coated aluminium (minimum thickness of powder coating 50 microns) Kg 23.00 326.60 7511.80
3 21.3.2 / 338 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc., with PVC / neoprene gasket etc., complete as per the architectural drawings and the directions of Engineer-in-Charge (Cost of aluminium snap beading shall be paid in basic item) - With glass panes of 5.50 mm thickness (weight not less than 13.75 kg / sqm). Sqm 5.00 673.55 3367.75
4 21.2.2 / 337 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II conforming to IS: 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc., complete as per architectural drawings and directions of Engineer-in-Charge - Pre-laminated particles board with decorative lamination on both sides. Sqm 5.00 812.60 4063.00
5 NS Supply of aluminium grill of size 6.25 mm dia with spacing (75 x 75) mm ) of approved design and fixing to the aluminium frame as per the directions of EIC. Sqm 3.20 671.00 2147.20
6 9.97.1 / 149 Providing and fixing aluminium tower bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete - 300 x 10 mm Each 4.00 71.45 285.80
7 9.76 / 147 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles with necessary screws etc., complete (Best make of approved quality). Each 1.00 332.65 332.65
8 9.100.1 / 150 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colur or shade with necessary screws etc., complete - 125 mm Each 4.00 48.80 195.20
9 9.101.1 / 150 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc., complete - Single rubber stopper. Each 2.00 19.05 38.10
10 9.83 / 148 Providing and fixing IS: 3564 marked Aluminium die cast body tubular type universal hydraulic door closer, Hardwyn make (Classic Queen) or equivalent with necessary accessories and screws etc., complete. Each 2.00 610.6 1221.20
- - Sub Total in Rs. - - - 39684.80
- - Add cost index of 23% Above CPWD DSR 2007 Rates - - - 9127.5
- - Total amount in Rs. - - - 48812.30
- - Grand total in Rs. - - - 48900.00
ESTATE OFFICER
COFFEE BOARD, BANGALORE
  1. I abide by all the tender conditions enclosed with this schedule vide No.Adm/Engg/DDR - CHU/Aluminium door/2008/ 575 dated 10th Mar 2008 (as per the conditions of Notice of inviting tender) and I am well aware of the same.
  2. I agree to execute the above work at _____ % ( ) ABOVE / BELOW the estimated amount of Rs 48900/-.
  3. EMD particulars : a) Drawn on bank / branch _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
    b) Demand Draft No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
    c) Amount in Rs. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
    - Sd -
    ESTATE OFFICER
    COFFEE BOARD, BANGALORE

    TENDERER