( 1 ) - Tender Schedule for the work of Repairs to 4 Nos., of Type III Quarters (2 units) at CTEC, Coffee Board, Gudalur.

Sl.No 2002 CPWD DSR.Item No. & Page No Description Unit Qty Rate Amount in
Rupees
1 16.24 / 175 Providing and fixing factory made P.V.C. door frame manufactured by M/s. Rajshri or equivalent of size 50 x 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet mitred at corners asnd joined with 2 Nos., of 150 mm long brackets of 15 x 15 mm square tube, the vertical door profiles sto be reinforced with 19 x 19 mm M.S. square tube of 19 guage, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65 / 100 mm sizse complete as per manufacturers specification and direction of Engineer-in-Charge. Metre 39.60 245.95 9739.62
2 16.25 / 176 Providing and fixing 30 mm thick factory made PVC rigid foam panelled door shutters manufactured by M/s. Rajshri or equivalent made from M.S. tube of 19 guage thickness, size 19 x 19 mm for styles and 15 x 15 mm for top and bottom, rails, covered with heat moulded PVC "C" channel of 5 mm thick sheet asnd 30 x 50 mm wide to form styles and 5 mm thick and 75 mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 5 mm thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail, panelling of 5 mm thick PVC sheet fitted in the M.S. frame welded / sealed to the styles and rails with 5 x 30 mm PVC sheet beading on either side and jointed together with solvent cement adhesive etc., complete as per manufacturers scification and direction of Engineer-in-Charge fixed to frames with 4 Nos., M.S. power coated butt hinges (For W.C. and bath room shutters). Sqm 11.76 1753.00 20615.28
3 15.23.1 / 169 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead - For thickness of tiles 10 mm to 25 mm Sqm 241.00 7.60 1831.60
4 15.1 / 167 Demolishing lime concrete and disposa of material within 50 meters lead. Cum 36.15 84.45 3052.87
5 14.1.1 / 157 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sq.meters and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - With cement mortar 1:4 (1 cement: 4 fine sand). Sqm 25.00 73.80 1845.00
6 15.13.1 / 168 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead - Of area 3 sq. meters and below. Each 4.00 14.75 59.00
7 15.44.1 / 171 Dismantling G.I. Pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 meters lead - 15 mm to 40 mm nominal bore. Metre 70.00 16.20 1134.00
8 11.4.3 / 124 Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of step etc., complete - 50 mm thick with 20 mm nominal size stone aggregate. Sqm 145.00 133.60 19372.00
9 15.2.1 / 167 Demolishing cement concrete including disposal of material within 50 meters lead - 1:3:6 or richer mix. Cum 11.60 242.10 2808.36
10 4.5.10 / 75 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level - 1:5:10 (1 cement: 1 coarse sand: 10 graded stone aggregate 40mm nominal size). Cum 13.00 1289.15 16758.95
11 5.3 / 79 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15o, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases upto floor five level excluding the costs of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Cum 1.50 2120.65 3180.98
12 5.14.3 / 80 Centring and shuttering including strutting, propping etc., and removal of form for - Suspended floors, roofs, landings, balconies and access platform. Sqm 12.96 111.20 1441.15
13 5.29.3 / 82 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete - Cold twisted bars. Kg 250.00 21.85 5462.50
14 9.25.3/ 104 Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands sand face veneers on both faces of shutters - 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 14.40 790.35 11381.04
15 10.12.3 / 120 Providing and fixing ISI marked steel glazed doors, windows and ventilators of standard rolled steel sections, joints mited and welded with 15 x 3 mm lugs, 10 cm long, embedded in cement concrete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or wiath bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of approved steel primer, excluding the cost of metal beading and other fitting except necessary hinges or pivots as required - Windows-side hung. Sqm 4.76 1065.75 5072.97
16 15.3 / 167 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metres lead. Cum 1.87 353.20 660.48
17 15.28.2 / 169 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of - Asbestos sheet. Sqm 72.00 8.00 576.00
18 12.10.1 / 137 Providing asbestos cement 6 mm thick corrugated sheets roofing and fixing with polymer coated J or L ghooks, bolts and nuts 8 mm dia G.I., plain and bitumen washers complete excluding the cost of purlins, rafters and trusses: Corrugated sheets - Upto 60 degrees pitch . Sqm 90.00 153.65 13828.50
19 12.14.1 / 137 Providing and fixing ridges and hips in asbestos cement sheet roofing - One pieces plain angular ridges. Metre 25.00 102.30 2557.50
20 19.1.2 / 192 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm snd cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parry ware, Hindware/ Seabird/ Orient (Coral) with all fittings and fixutres complete including cutting and making good the walls and floors wherever required - White vitreous China Orissa pattern W.C. pan of size 580 x 440 mm with integral type floot rests. Each 4.00 1767.45 7069.80
21 19.7.4 / 194 Providing and fixing wash basin with C.I / M.S. brackets,15 mm C.P. brass pillar taps, Kingston / Gem / Techno / Parko, 32 mm C.P. brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the walls wherever required - Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap. Each 4.00 770.10 3080.40
22 19.10A.2.2 / 195 Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. Brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls where ever required - 610 x 510 mm bowl depth 178 mm. Each 4.00 1265.45 5061.80
23 20.89 / 218 Providing and placing on terrace (at all floor levels) polythene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or euivalent having valid ISI licence). Per litre capacity. 2000.00 3.95 7900.00
24 20.2.1.1 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc., (Internal work) - Exposed on wall - 15 mm dia nominal bore. Metre 10.00 62.65 626.50
25 20.2.1.2 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc.,(Internal work) Exposed on wall - 20 mm dia nominal bore. Metre 30.00 78.65 2359.50
26 20.2.1.3 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc., (Internal work) Exposed on wall - 25 mm dia nominal bore. Metre 70.00 103.85 7269.50
27 20.90 (a) / 218 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 - 15 mm nominal bore. Each 12.00 163.75 1965.00
28 20.94(a) / 218 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS: 8931 - 15 mm nominal bore. Each 4.00 185.80 743.20
29 20.9.3 / 211 Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) - 25 mm nominal bore. Each 4.00 168.75 675.00
30 20.87.3 / 217 Providing and fixing G.I., Union in G.I. Pipe including cutting and threading the pipe and making long screws etc., complete (new work) - 25 mm nominal bore. Each 5.00 73.00 365.00
31 20.10.3.3 / 211 Providing and fixing ball valve (brass) of approved quality complete - High or low pressure with plastic floats. Each 2.00 200.65 401.30
32 20.76.1 / 216 Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work - 15 mm diameter pipe. Metre 10.00 3.20 32.00
33 20.76.2 / 216 Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work - 20 mm diameter pipe. Metre 30.00 3.75 112.50
34 20.76.3 / 216 Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work - 25 mm diameter pipe. Metre 70.00 4.95 346.50
35 25.8.1 / 247 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc., consisting of following operations (a) Applying and grouting a slurry coa tof neat cement using 2.75 kg / sqm of cement admixed with proprietary water proofing compound conforming to IS: 2645 over the RCC slab including cleaning the surfaces before treatment (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with proprietary water proofing compound confsorming to IS: 2645 over 20 mm thick layer ofcement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with prorietary water proofing compound conforming to IS: 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry admixed with properietary water profing compound conforming to IS: 2645 (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with proprietary water proofing compound conforming to IS: 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge - With average thickness of 120 mm and minimum thickness at a khurra as 65 mm.admixed with proprietary water proofing compound conforming to IS: 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge - With average thickness of 120 mm and minimum thickness at a khurra as 65 mm. Sqm 225.00 282.80 63630.00
36 13.77.2 / 152 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade - New work (two or more coats) over and including priming coat with cement primer. Sqm 760.96 29.70 22600.51
37 13.79.1 / 152 Finishing walls with water proofing cement paint "Snowcem - Plus" of M/s. Snowcem India Ltd., or equivalent of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm). Sqm 605.19 23.10 13979.89
38 13.93.1 / 155 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. Sqm 206.46 24.25 5006.66
39 14.76 (13.72.2) / 163 White washing with whiting to give an even shade - Old work (two or more coats). Sqm 515.65 2.85 1469.60
40 14.78 (13.74) / 164 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc., complete. Sqm 761.00 2.10 1598.10
41 NS Repairs the door & window including necessary fitting such as hinges, screws and labour charges etc., as per the directions of EIC. Nos 20.00 158.00 3160.00


Sub Total


270830.56


Add cost index for Gudalur considered at Ooty (315 - 166) / 166 x 100 = 89.76%


243097.5


Total amount in Rs.


513928.06


Total amount rounded in Rs.


5,13,928.00







( 2 ) - Tender Schedule for the work of Providing Dry stone pitching to the foot path from upper pump house to lower pump house at padiaru river area at CTEC, Coffee Board, Gudalur.
Sl.No. 2002 CPWD DSR.Item No. & Page No Description Unit Quantity Rate in Rs. Amount in Rs.
1 22.24 / 239 Supplying and stacking of hard stone (for store pitching) 22.5 cm - thick at site. Cum 315.00 388.80 122472.00
2 22.25A / 239 Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc., all complete. Sqm 1400.00 68.15 95410.00
3 4.17.1 / 77 Providing and fixing at or near gound level pre cast cement concrete in kerbs, edgings etc., as per approved pattern and setting in position with cement mortar 1:3 (1 cement: 3 coarse sand) including the cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete - 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Cum 4.05 2391.00 9683.55


Sub Total


227565.55


Add cost index for Gudalur considered at Ooty (315 - 166) / 166 x 100 = 89.76%


204262.84


Total amount in Rs.


431828.39


Total amount rounded in Rs.


4,31,828.00







( 3 ) - Tender Schedule for the work of Repairs to Office building at CTEC, Coffee Board, Gudalur.
Sl.No. 2002 CPWD DSR.Item No. & Page No Description Unit Quantity Rate in Rs. Amount in Rs.
1 15.1 / 167 Demolishing lime concrete and disposa of material within 50 meters lead. Cum 18.00 84.45 1520.10
2 15.23.1 / 169 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead - For thickness of tiles 10 mm to 25 mm Sqm 120.00 7.60 912.00
3 4.5.5 / 75 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level - 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). Cum 3.50 1588.35 5559.23
4 1.1.1(a) Disposal of building rubbish for a lead ot less than 500m and upto 2 Km by mechanical transport including loading and unloading has directed by the EIC. Cum 21.50 31.51 677.47
5 15.56 / 172 Dismantaling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. Sqm 35.00 5.40 189.00
6 25.8.1 / 247 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc., consisting of following operations (a) Applying and grouting a slurry coa tof neat cement using 2.75 kg / sqm of cement admixed with proprietary water proofing compound conforming to IS: 2645 over the RCC slab including cleaning the surfaces before treatment (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with proprietary water proofing compound confsorming to IS: 2645 over 20 mm thick layer ofcement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with prorietary water proofing compound conforming to IS: 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry admixed with properietary water profing compound conforming to IS: 2645 (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with proprietary water proofing compound conforming to IS: 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge - With average thickness of 120 mm and minimum thickness at a khurra as 65 mm.admixed with proprietary water proofing compound conforming to IS: 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge - With average thickness of 120 mm and minimum thickness at a khurra as 65 mm. Sqm 120.00 282.80 33936.00
7 12.39 / 139 Making Khurras 45 x 435 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 7.00 68.50 479.50
8 11.73 / 134 Providing and fixing Ist quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sqm 35.00 373.30 13065.50
9 11.29A.2 / 128 Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm laid in floors and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) - Medium shade using 50% white cement and 50% ordinary cement. Sqm 80.00 343.40 27472.00
10 13.79.2 / 152 Finishing walls with water proofing cement paint "Snowcem - Plus" of M/s. Snowcem India Ltd., or equivalent of required shade - Old work (One or more coats applied @ 2.20 kg / 10 sqm) over priming coat of "Cemprover" primer of Snowcem or equivalent applied @ 0.80 litres / 10 sqm complete including cost of priming coat.. Sqm 146.00 21.45 3131.70
11 13.77A (a) / 152 Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete as per manufacturer's specification - Two or more coats. Sqm 255.00 16.20 4131.00
12 14.76 (13.72.2) / 163 White washing with whiting to give an even shade - Old work (two or more coats). Sqm 120.00 2.85 342.00
13 15.44.1 / 171 Dismantling G.I. Pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 meters lead - 15 mm to 40 mm nominal bore. Metre 120.00 16.20 1944.00
14 20.2.2.1 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc., (Internal work) concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall - 15 mm dia nomina bore. Metre 5.00 88.35 441.75
15 20.2.2.2 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc., (Internal work) concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall- 20 mm dia nominal bore. Metre 10.00 102.40 1024.00
16 20.3.3 / 210 Providing and fixing G.I. Pipes complete with G.I., fittings including trenching and refilling etc. ( external work) - 25 mm dia nominal bore. Metre 90.00 88.80 7992.00
17 20.90 (a) / 218 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 - 15 mm nominal bore. Each 2.00 163.75 327.50
18 13.93.1 / 155 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. Sqm 80.00 24.25 1940.00
19 NS Supplying and fixing 25 ltr capacity keysor including giving connections and all accessories. Nos 1.00 3700.00 3700.00
20 15.13.1 / 168 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead - Of area 3 sq. meters and below. Each 2.00 14.75 29.50
21 16.25 / 176 Providing and fixing 30 mm thick factory made PVC rigid foam panelled door shutters manufactured by M/s. Rajshri or equivalent made from M.S. tube of 19 guage thickness, size 19 x 19 mm for styles and 15 x 15 mm for top and bottom, rails, covered with heat moulded PVC "C" channel of 5 mm thick sheet asnd 30 x 50 mm wide to form styles and 5 mm thick and 75 mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 5 mm thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail, panelling of 5 mm thick PVC sheet fitted in the M.S. frame welded / sealed to the styles and rails with 5 x 30 mm PVC sheet beading on either side and jointed together with solvent cement adhesive etc., complete as per manufacturers scification and direction of Engineer-in-Charge fixed to frames with 4 Nos., M.S. power coated butt hinges (For W.C. and bath room shutters). Sqm 3.15 1753.00 5521.95
22 16.24 / 175 Providing and fixing factory made P.V.C. door frame manufactured by M/s. Rajshri or equivalent of size 50 x 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet mitred at corners asnd joined with 2 Nos., of 150 mm long brackets of 15 x 15 mm square tube, the vertical door profiles sto be reinforced with 19 x 19 mm M.S. square tube of 19 guage, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65 / 100 mm sizse complete as per manufacturers specification and direction of Engineer-in-Charge. Metre 9.90 245.95 2434.91
23 12.78.2 / 143 Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with semi ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - Single socketed pipes - 110 mm diameter. Metre 21.00 126.65 2659.65
24 12.79.2.2 / 143 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS: 136592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - 110 mm Each 14.00 109.60 1534.40


Sub Total


120965.15


Add cost index for Gudalur considered at Ooty (315 - 166) / 166 x 100 = 89.76%


108578.32


Total amount in Rs.


229543.47


Total amount rounded in Rs.


2,29,543.00
( 4 ) - Tender Schedule for the work of Rewiring of Electrical insulations for Office building, SLO quarters, 4 Nos., of field staff quarters and store room including replacing fitting & fans at CTEC, Coffee Board, Gudalur.
Sl.No. 1994 CPWD Electrical DSR.Item No. & Page No Description Unit Quantity Rate in Rs. Amount in Rs.
1
Copper wiring in PVC conduit - Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sqm mm PVC insulated copper conductor cable in surface / recesssed PVC conduit along with 1 No., of 2.24 mm dia bare copper wire for looop earthing as required - Group 'A'. Point 76 141.00 10716.00
2
Copper wiring in PVC conduit - Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sqm mm PVC insulated copper conductor cable in surface / recesssed PVC conduit along with 1 No., of 2.24 mm dia bare copper wire for looop earthing as required - Group 'B'. Point 23 186.00 4278.00
3
Copper wiring in PVC conduit - Wiring for light point / fan light / exhaust fan point / call bell point with 1.5 Sqm PVC insulated copper conduct cable in surface / recessed PVC conduit along with 1 No., 2.24 mm dia bare copper wire for loop earthings required - Group 'C' Point 41 235.00 9635.00
4
Wiring for 3 pin 5/6 Amps plug point with 1.5 Sqm PVC insulated copper conductor cable including proviidng and fixing 3 pin 5/6 amps socket outlet on switch board (in surface / recessed PVC conduit wiring system) and 5/6 amps piano / tumbler (type switch earthing the 3rd pin painting etc., as required (To be used only in non residential building). Point 7 77.00 539.00
5
Wiring for lighting with 2 x 1.5 Sqmm PVC insulated copper conductor single core cale in surface / recessed PVC conduit along 1 No., 2.24 mm dia aluminium bare wire for ooop earthing as required. Mtrs 100 29.00 2900.00
6
Wiring for light / power plug with 2 x 4 Sqm PVC insulated copper conductor single condctor cable in surface / recessed PVC conduit along 1 No., 2.24 mm dia copper bare wire for looop earthing as require. Mtrs 50 46.00 2300.00
7
Wiring for light / power plug with 4 x 4 Sqm PVC insulated copper conductor single condctor cable in surface / recessed PVC conduit along s Nos., 2.24 mm dia copper bare wire for looop earthing as require. Mtrs 40 77.00 3080.00
8
Wiring for circuit wiring with 2 x 1.5 Sqm PVC insulated copper conductor single core cale in surface recesssed PVC conduit etc., as required. Mtrs 350 29.00 10150.00
9
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in casse of recessed conduit as required. Mtrs 100 17.00 1700.00
10
Supplying and fixing metal box of following sizes (nomininal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the iron including painting etc., as required. Each 15 28.00 420.00
11
Supplying and fixing metal box of 180mm x 100mm x 60mm (nominal size) on surface or in recess with suitable size of phenol laminated sheet cover in the front including providing and fixing 3 pin 5/6 amps socket out let and 5/6 amps tumbler piano type siwtch connection painting etc., as resquired (For light plug). Set 22 74.00 1628.00
12
Supplying and fixing metal box of 180mm x 60mm (nominal size) on surfacae or in recess with suitable size of phenolic laminated sheet cover in the front including providing and fixing 3 pin 15/16 amps socket out let and 15/16 amps tumbler / piano type switch connection painting etc., as required (for power plug). Set 20 104.00 2080.00
13
Supplying and fixing brasss battern / angle holder including connection etc., as required. Each 26 30.00 780.00
14
Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps par fitting complete with all accessories including connection etc., as required. Each 22 7.00 154.00
15
Supplying and fixing call bell and piano type bell push suitable for DC / AC single phase 230 V complete as required. Each 7 45.00 315.00
16
ITC of prewired flourescent fitting of all type complete with all accessories asnd tubes etc., directly on ceiling / wall including connection with 1.5 Sqm PVC insulated coppe conductor SC cable etc., as required. Each 35 15.00 525.00
17
Installation of Ex.fan upto 450 mm sweep in the existing opening including making the hole to suit the above size of the fan making good the damages connections testing commissioning etc., as required. Each 25 18.00 450.00
18
Installation of Ex.fan upto 450 mm sweep in the existing opening including making the hole to suit the above size of the fan making good the damges connections testing commissioning etc., as required Each 5 82.00 410.00
19
Extra for fixing the louvers / shutters complete with frame for exhaust fans of all sizes. Each 5 22.00 110.00
20
Supplying and fixing 5 amps to 32 amps rating 240 V 'L' series MCB of following poles in the existing MSCB DB complet with connections testing and commissioning etc., as required.



21
(a) Single pole Each 40 83.00 3320.00


(b) Single pole & neutral Each 16 185.00 2960.00
22
Supplying and fixinag 20 amps 240 V SPN industrial type socket ut let with two pole and earth metal enclosed plug top along with 20 amps 'C' series SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc., as required. Each 1 489.00 489.00
23
Supplying and fixing of following way single pole and neutral sheet steel MCB DB 240 V on surface / recess complete with tinned copper bus bar neutral link earth bar din bar detachable glands plaate interconnections testing and commissioning, painting earthing etc., as required.





(a) 8 way Each 1 333.00 333.00


(b) 12 way Each 7 418.00 2926.00
24
Earthing with GI earth pipe 2.5 mtr long and 40mm dia cincluding accessories and providing measonry enclosure with cover plate having locking arrangement etc., complete as required. Set 7 751.00 5257.00
25
Extra for using salt and charcoal for pipe earth. Set 7 182.00 1274.00
26
Suppyng and laying earth connection with earth eletrode with 4 mm copper wire in 15 mm dia GI pipe from earth electrode etc., as required. Mtrs 25 56.00 1400.00
27
Supplying and fixing 4mm dia copper wire on surface or in recess for loop earthing as required. Mtrs 150 25.00 3750.00
28
Supplying and drawing 2.24 mm dia copper wire on surface or in recess for loop earthing along with the existing surface / recessed conduit / casing and copping as required. Mtrs 350 5.00 1750.00
29 NS Supply of 1400 mm sweep ceiling fan with reg., (Crompton greaves / Usha / Orient or equivalent. Each 7 1200.00 8400.00
30 NS Supply of 1200 mm sweep ceiling fan with reg., (Crompton greaves / Usha / Orient or equivalent. Each 22 1000.00 22000.00
31 NS Supply of 1 x 40 W box type fitting without tub. Each 25 250.00 6250.00
32 NS Supply of 2 x 40 W box type fitting without tub. Each 18 450.00 8100.00
33 NS Supply of wall bracket without lamp. Each 22 225.00 4950.00
34 NS Providing 12 Nos., 70 W HLPSV lamp street light fittings, 20 Nos., FRP looping box, wiring, painting the existing street light pipe etc., Each 12 2500.00 30000.00
35
Supply and drawing the following size copper conductor with G.I., string wire and PVC as over head connection from TNEB pole to meter board as required - 2 x 4 Sq.mm. Sqm 360 42.00 15120.00
36 NS Dismantling of existing electrical installation including handing over the same and making good the damages and finishing etc., as required. Each 6 800.00 4800.00


Sub Total


175249.00


Add cost index for Gudalur considered at Ooty (315 - 166) / 166 x 100 = 89.76% except Sl.No.29 to 34 & 36 is Rs. 90749/-


81456.30


Add 15% over the Non schedule item from 29 to 34 & 36, cost for this item is Rs.84,500/-


12675.00


Total amount in Rs.


269380.30


Total amount rounded in Rs.


2,69,380.00







( 5 ) - Tender Schedule for the work of Providing water supply from open well (Drinking water) to 10000 ltr capacity sintex tank for SLO quarters, Office building, Type III quarters and and to 4 Nos., labour quarters at CTEC, Coffee Board, Gudalur.
Sl.No. 2002 CPWD DSR.Item No. & Page No Description Unit Quantity Rate in Rs. Amount in Rs.
1 NS Supply and fixing Texmo industries make TRF 1517 / 2 HP 17 stage single phase submersible pumpset. Each 1 14170.00 14170.00
2 NS Supplying and fixing L & T single phase panel board including giving connections etc., complete. Each 1 2450.00 2450.00
3 NS Providing and fixing HDPE 6 Kg (godavaari) of size 32 dia including conveyance and fitting charges etc., complete. - For section out let pipe. Mtr 15 45.00 675.00
4 NS Providing service connection to L & T single phase panel board as per the directions of EIC. Mtr 2 250.00 500.00
5 NS Suplying and fixing M.S., heavy clamp 0.45m long at 32mm dia pipe including labour chaarges etc., complete. No. 1 250.00 250.00
6 NS Supply and Run of 2.5 Sqm finolex 3 Nos., flat wire including giving connection etc., complete susbmersible pump to starter. Mtr 20 54.00 1080.00
7 NS Supply and run of 2 core 4 Sqmm (7/20) around U.G., cable of make CCI / universal or equivalenat make as per the directions of EIC - cost including clamp, gland etc., complete. Mtr 120 80.00 9600.00
8 NS Supplying and fixing 20mm thick teak wood plank in the existing angle iron board for fixing TNEB meter in and eat out etc., as required. No. 1 900.00 900.00
9 NS Supplying and fixing the following switch gear in the existing anagle iron board. No. 1 598.00 598.00
10 NS Supplying and fixing the following rating cut outs in the existing teak wood board - 32 SPNSFU (rewirable) - CAT - B. No. 3 65.00 195.00
11 EAR GIPIP 2101 / 46 G.I., earth pipe electrode: Earthing GI pipe 4.50m 10 long x 40mm dia including accesssories and providing masonry enclosure with cover plate having lacking arrangement and watering pipe etc., (but without charcoal or coke and salt) complete as required. Set 1 751.00 751.00
12 EAR CHARLPIP 2102 / 46 Salt / Charcoal for pipe earth electrode: Extra for using salt and charcoal for pipe earth electrode as srequired. Set 1 182.00 182.00
13 EARC UWRLP 1821 / 47 Providing and fixing 4mm copper earth wire in pipe: Providing and laying earth connections from earth electrode with 4mm dia copper wire in 15mm dia GI pipe from earth electrode as required. Mtr 5 56.00 280.00
14 EARCU WRSUR 2119 / 47 Providing and fixing copper looop earth wire in surface / recess: Providing & fixing 4.00 mm dia copper wire or surface or in recess for loop earthing as required. Mtr 10 25.00 250.00
15 NS Supplying and drawing the following size aluminium of conductor with GI string wire inlcuding insulator reel and PVC pipe as over head connection from TNEB pole to meter board as required 2 x 4 Sqm. Mtr 30 25.00 750.00
16 NS Supplying and fixing 2 Nos., 32A nuts with a suitable wooden plank on pole as aerial base as required. Set 1 275.00 275.00
17 NS Supplying and fixing 25mm dia GI "B" class pipe along with weather proof pipe along with weather proof smile core copper conductor cable in for service connection as for the directions of EIC. Mtr 3 150.00 450.00
18 NS Liaison charges for getting external service connection from TNEB which includes registration, documenttion etc., complete No. 1 2500.00 2500.00
19 NS Initial deposits for new service connection charges to TNEB ( bill to be submitted). Lump 1 2500.00 2500.00
20 20.3.4 Proiding and fixing GI pipes complete with GI fittings including trenching and refilling etc., (external work) 32 mm dia nominal bore. Mtr 330 103.55 34171.50
21 20.4.1 / 210 Making connection of G.I., distribution branch with G.I. Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc., complete - 25 to 40 mm nominal bore. Each 6 117.75 706.50
22 20.9.4 / 211 Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) - 32 mm nominal bore. Each 4 230.85 923.40
23 20.87.4 / 217 Providing and fixing G.I., Union in G.I. Pipe including cutting and threading the pipe and making long screws etc., complete (new work) - 32 mm nominal bore. Each 7 85.20 596.40
24 NS Providing and fixing sintex water storage tank of 10000 ltr capacity. Ltr 10000 3.95 39500.00


Sub Total


114253.80


Add cost index for Gudalur considered at Ooty (315 - 166) / 166 x 100 = 89.76% ( Item considered from Sl.No.20 to 24 amounting to Rs.75,898/-)


68126.00


For Non Schedule Item 10% market rate, 1% transportation charges and 4% sales tax on works contract is considered and thus, 15% is considered for Sl.No.1 to 10 and 15 to 18 is Rs.34,393/-


5158.95


For Electrical work : 90% is the enhancement as per CPWD Electrical DSR 1994 rates for item No.11 to 14 is Rs.1,463/-.


1316.70


Total amount in Rs.


188855.45


Total amount rounded in Rs.


1,88,855.00
( 6 ) - Tender Schedule for the Renovation of Type IV Quarters at CTEC, Coffee Board, Gudalur.
Sl.No. 2002 CPWD DSR.Item No. & Page No Description Unit Quantity Rate in Rs. Amount in Rs.
1 4.5.10 / 75 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level - 1:5:10 (1 cement: 1 coarse sand: 10 graded stone aggregate 40mm nominal size). Cum 2.00 1289.15 2578.30
2 4.16.1 / 77 Providing and fixing upto floor five level precasts cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 cement: 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete - 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agregate 20mm nominal size). Cum 0.05 2837.30 141.87
3 5.29.7 / 82 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete - Thermo-Mechanically Treated bars. Kg 30.00 21.85 655.50
4 16.24 / 175 Providing and fixing factory made P.V.C. door frame manufactured by M/s. Rajshri or equivalent of size 50 x 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet mitred at corners asnd joined with 2 Nos., of 150 mm long brackets of 15 x 15 mm square tube, the vertical door profiles sto be reinforced with 19 x 19 mm M.S. square tube of 19 guage, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65 / 100 mm sizse complete as per manufacturers specification and direction of Engineer-in-Charge. Metre 9.90 245.95 2434.91
5 16.25 / 176 Providing and fixing 30 mm thick factory made PVC rigid foam panelled door shutters manufactured by M/s. Rajshri or equivalent made from M.S. tube of 19 guage thickness, size 19 x 19 mm for styles and 15 x 15 mm for top and bottom, rails, covered with heat moulded PVC "C" channel of 5 mm thick sheet and 30 x 50 mm wide to form styles and 5 mm thick and 75 mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 5 mm thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail, panelling of 5 mm thick PVC sheet fitted in the M.S. frame welded / sealed to the styles and rails with 5 x 30 mm PVC sheet beading on either side and jointed together with solvent cement adhesive etc., complete as per manufacturers scification and direction of Engineer-in-Charge fixed to frames with 4 Nos., M.S. power coated butt hinges (For W.C. and bath room shutters). Sqm 3.15 1753.00 5521.95
6 NS Providing & fixing windows hook. Nos 40.00 10.00 400.00
7 15.13.1 / 168 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead - Of area 3 sq. meters and below. Each 2.00 14.75 29.50
8 13.77.2 / 152 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade - New work (two or more coats) over and including priming coat with cement primer. Sqm 250.00 29.70 7425.00
9 13.79.1 / 152 Finishing walls with water proofing cement paint "Snowcem - Plus" of M/s. Snowcem India Ltd., or equivalent of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm). Sqm 250.00 23.10 5775.00
10 13.93.1 / 155 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. Sqm 165.64 24.25 4016.77
11 14.76 (13.72.2) / 163 White washing with whiting to give an even shade - Old work (two or more coats). Sqm 177.39 2.85 505.56
12 14.82 (13.80) / 164 Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc., complete. Sqm 250.00 2.80 700.00
13 14.1.1 / 157 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sq.meters and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - With cement mortar 1:4 (1 cement: 4 fine sand). Sqm 23.00 73.80 1697.40
14 15.23.1 / 169 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead - For thickness of tiles 10 mm to 25 mm Sqm 170.00 7.60 1292.00
15 15.1 / 167 Demolishing lime concrete and disposa of material within 50 meters lead. Cum 26.00 84.45 2195.70
16 15.44.1 / 171 Dismantling G.I. Pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 meters lead - 15 mm to 40 mm nominal bore. Metre 70.00 16.20 1134.00
17 20.89 / 218 Providing and placing on terrace (at all floor levels) polythene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or euivalent having valid ISI licence). Per litre capacity. 1000.00 3.95 3950.00
18 20.2.1.1 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc., (Internal work) - Exposed on wall - 15 mm dia nominal bore. Metre 5.00 62.65 313.25
19 20.2.1.2 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc.,(Internal work) Exposed on wall - 20 mm dia nominal bore. Metre 20.00 78.65 1573.00
20 20.2.1.3 / 210 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc., (Internal work) Exposed on wall - 25 mm dia nominal bore. Metre 35.00 103.85 3634.75
21 20.90 (a) / 218 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 - 15 mm nominal bore. Each 4.00 163.75 655.00
22 20.94(a) / 218 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS: 8931 - 15 mm nominal bore. Each 4.00 185.80 743.20
23 20.9.3 / 211 Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) - 25 mm nominal bore. Each 3.00 168.75 506.25
24 20.87.1 / 217 Providing and fixing G.I., Union in G.I. Pipe including cutting and threading the pipe and making long screws etc., complete (new work) - 15 mm nominal bore. Each 3.00 51.90 155.70
25 20.87.2 / 217 Providing and fixing G.I., Union in G.I. Pipe including cutting and threading the pipe and making long screws etc., complete (new work) - 20 mm nominal bore. Each 4.00 60.75 243.00
26 20.87.3 / 217 Providing and fixing G.I., Union in G.I. Pipe including cutting and threading the pipe and making long screws etc., complete (new work) - 25 mm nominal bore. Each 5.00 73.00 365.00
27 20.10.3.3 / 211 Providing and fixing ball valve (brass) of approved quality complete - High or low pressure with plastic floats. Each 1.00 200.65 200.65
28 20.76.1 / 216 Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work - 15 mm diameter pipe. Metre 5.00 3.20 16.00
29 20.76.2 / 216 Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work - 20 mm diameter pipe. Metre 20.00 3.75 75.00
30 20.76.3 / 216 Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work - 25 mm diameter pipe. Metre 35.00 4.95 173.25
31 25.8.1 / 247 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc., consisting of following operations (a) Applying and grouting a slurry coa tof neat cement using 2.75 kg / sqm of cement admixed with proprietary water proofing compound conforming to IS: 2645 over the RCC slab including cleaning the surfaces before treatment (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with proprietary water proofing compound confsorming to IS: 2645 over 20 mm thick layer ofcement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with prorietary water proofing compound conforming to IS: 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry admixed with properietary water profing compound conforming to IS: 2645 (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with proprietary water proofing compound conforming to IS: 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge - With average thickness of 120 mm and minimum thickness at a khurra as 65 mm. Sqm 180.00 282.80 50904.00
32 12.39 / 139 Making Khurras 45 x 435 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 6.00 68.50 411.00
33 12.78.2 / 143 Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with semi ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - Single socketed pipes - 110 mm diameter. Metre 18.00 126.65 2279.70
34 12.79.2.2 / 143 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS: 136592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - 110 mm Each 12.00 109.60 1315.20
35 NS Repairs in the doors asnd windows including necessary fittings such as hinges, screws and labour charges etc., complete. Nos 25.00 158.00 3950.00


Sub Total


107967.40


Add cost index for Gudalur considered at Ooty (315 - 166) / 166 x 100 = 89.76%


96911.54


Total amount in Rs.


204878.94


Total amount rounded in Rs.


2,04,879.00







( 7 ) - Tender Schedule for the work of Repairs to sump and pump house at CTEC, Coffee Board, Gudalur.
Sl.No. 2002 CPWD DSR.Item No. & Page No Description Unit Quantity Rate in Rs. Amount in Rs.
1 4.5.10 / 75 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level - 1:5:10 (1 cement: 1 coarse sand: 10 graded stone aggregate 40mm nominal size). Cum 8.00 1289.15 10313.20
2 13.14.1 / 147 12 mm cement plaster finished with a floating coat of neat cement of mix - 1:3 (1 cement: 3 fine sand). Sqm 72.00 67.55 4863.60
3 11.4.1 / 124 Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of step etc., complete - 25 mm thick with 12.5 mm nominal size stone aggregate. Sqm 40.00 113.70 4548.00
4 14.76 (13.72.3) / 163 White washing with whiting to give an even shade - Old work (one or more coats). Sqm 99.00 1.75 173.25
5 13.93.1 / 155 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. Sqm 23.89 24.25 579.33
6 13.79.2 / 152 Finishing walls with water proofing cement paint "Snowcem - Plus" of M/s. Snowcem India Ltd., or equivalent of required shade - Old work (One or more coats applied @ 2.20 kg / 10 sqm) over priming coat of "Cemprover" primer of Snowcem or equivalent applied @ 0.80 litres / 10 sqm complete including cost of priming coat.. Sqm 57.20 21.45 1226.94
7 13.9.4 / 147 15 mm cement plaster on the rough side of single or half brick wall of mix - 1:6 (1 cement: 6 fine sand). Sqm 50.00 51.00 2550.00
8 10.7.2 / 119 Providing and fixing 1 mm thick M.S. sheet door with frame of 40 x 40 x 6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer - Using M.S. angles 40 x 40 x 6 mm for diagonal braces - Using flats 30 x 6 mm for diagonal braces and central cross piece. Sqm 1.89 938.45 1773.67
9 10.14 / 121 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15 x 3 mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Kg 18.00 27.55 495.90
10 10.4 / 119 Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Kg 180.00 24.30 4374.00
11 NS Providing and fixing chicken mesh. Sqm 140.00 29.10 4074.00
12 15.2.1 / 167 Demolishing cement concrete including disposal of material within 50 meters lead - 1:3:6 or richer mix. Cum 12.00 242.10 2905.20


Sub Total


37877.09


Add cost index for Gudalur considered at Ooty (315 - 166) / 166 x 100 = 89.76%


33998.48


Total amount in Rs.


71875.57


Total amount rounded in Rs.


71,876.00


Over all total amount for the Estimate No.1 to 7 is Rs.


19,10,289.00
ESTATE OFFICER
COFFEE BOARD, BANGALORE
  1. I abide by all the tender conditions enclosed with this schedule vide No.Adm/Engg/SLO - Gudalur / Civil Works / 2007/ Dated 31st Aug 2007 (as per the conditions of Notice of Initing tender) and I am well aware of the same.
  2. I agree to execute the above work at ____ % (Percentage) ABOVE / BELOW.
  3. EMD particulars : a) Drawn on bank / branch _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
    b) Demand Draft No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
    c) Amount in Rs. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

    CONTRACTOR