| Sl.No |
2007 CPWD DSR ITEM NO. & PAGE No. |
Description of Items |
Unit |
Qty |
Rate in Rs. |
Amount in
Rupees |
| 1 |
NS |
Dissmantling of Air cooler unit as per the directions of OIC. |
Each |
1.00 |
250.00 |
250.00 |
| 2 |
15.12.1 / 227 |
Dismantling
doors, windows and clerestory windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc., complete and stacking within 50
meters lead - Of area 3 sq. meters and below. |
Each |
1.00 |
54.60 |
54.60 |
| 3 |
10.6.2 / 163 |
Supplying
and fixing rolling shutters of approved make, made of required size
M.S. laths inter locked together through their entire length and
jointed together at the end by end locks mounted on specially designed
pipe shaft with brackets, side guides and arrangements for inside and
outside locking with push and pull operation complete including the
cost of providing and fixing necessary 27.5 cm long wire springs grade
No.2 and M.S.top cover of required thickness for rolling shutters - 80
x 1.20 mm M.S. laths with 1.20 mm thick top cover. |
Sqm |
2.70 |
965.35 |
2606.45 |
| 4 |
8.2.2.2 / 120 |
Providing
and fixing 18 mm thick gang saw cut mirror polished premoulded and
prepolished) machine cut for kitchen platfors, vanity counters, window
sills, facias and similar locations of required size of approved shade,
colour and texture laid over 20mm thick base cement mortar 1:4 (1
cement: 4 coarse sand) with joints treated with white cement, mixed
with matching pigment, epoxy touch ups, including rubbing, curing etc.,
complete at all levels.- Granite of any colour and shade - Area of slab
over 0.50 Sqm. |
Sqm |
1.44 |
2543.65 |
3662.86 |
| 5 |
8.3.2 / 120 |
Extra
for providing edge moulding to 18 mm thick marble stone counters,
Vanities etc. including machine polishing to edge to give high gloss
finish etc., complete as per design approved by Engineer-in-Charge -
Granite work |
Metre |
4.80 |
97.60 |
468.48 |
| 6 |
21.1.1.2 / 337 |
Providing
and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sectuibs/
appropriate Z sections and other sections of approved make conforming
to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with
fixing clips, or with expansion hold fastners including necessary
filling up of gaps at junctions, at top, bottom and sides with required
PVC / neoprene, felt etc. Aluminium sections shall be smooth, rust
free, straight, miitred and jointed mechanically wherver required
including cleat angle, Aluminium snap beading for glazing / panelling,
C.P. brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-Charge (Glazing and paneling
to be paid for separately ) - For fixed portion - Powder coated
aluminium (minimum thickness of powder coating 50 micron). |
Kg |
120.00 |
306.30 |
36756.00 |
| 7 |
21.1.2.2 / 337 |
Providing
and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sectuibs/
appropriate Z sections and other sections of approved make conforming
to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with
fixing clips, or with expansion hold fastners including necessary
filling up of gaps at junctions, at top, bottom and sides with required
PVC / neoprene, felt etc. Aluminium sections shall be smooth, rust
free, straight, miitred and jointed mechanically wherver required
including cleat angle, Aluminium snap beading for glazing / panelling,
C.P. brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-Charge (Glazing and paneling
to be paid for separately ) - For shutters of doors, windows &
ventilators including providing and fixing hinges / pivots and making
provision for fixing of fittings wherever required including the cost
of PVC / neoprene gasket required (Fittings shall be paid for
separately) - Powder coatd aluminium (minimum thickness of powder
coating 50 micron). |
Kg |
20.00 |
326.60 |
6532.00 |
| 8 |
21.2.2 / 337 |
Providing
and fixing 12mm thick prelaminated particle board flat pressed three
layer or graded wood particle board conforming to IS: 12823 Gradae I
Type II, in panelling fixed in aluminium doors, windows shutters an
partition frames with C.P. brass / stainles steel screws etc., complete
as per architectural drawings and directions of engineer-in-charge -
Prelaminated particle board with decorative lamination on both sides. |
Sqm |
22.00 |
812.60 |
17877.20 |
| 9 |
21.3.1 / 338 |
Providing
and fixing glazing in aluminium door, window, ventilator shutters an
partitions etc., with PVC / neoprene gasket etc., complete as per the
architectural drawings and the directions of engineer-in-charge (Cost
of aluminium snap beading shall be paid in basic item) - With float
glass panes of 4.0 mm thickness. |
Sqm |
7.00 |
554.95 |
3884.65 |
| 10 |
21.16.2 / 340 |
Providing
fixing aluminium round shape handle of outer dia 100 mm with SS screws
etc., complete as er direction of Engineer-in-Charage - Powder coated
minimum thickness 50 micron aluminium. |
each |
4.00 |
49.95 |
199.80 |
| 11 |
9.97.3 / 149 |
Providing
and fixing aluminium tower bolt ISI marked anodised (anodic coating not
less than grade AC 10 as per IS: 1868) transparent or dyed to required
colour or shade with necessary screws etc., complete - 200 x 10 mm |
Each |
4.00 |
52.00 |
208.00 |
| 12 |
21.13 / 339 |
Providing
and fixinag 100 mm brass locks (best make of approved quality) for
aluminium doors including necessary cutting and making good etc.,
complete. |
each |
2.00 |
208.35 |
416.70 |
| 13 |
6.12.2 / 100 |
Half
brick masonry with bricks of class designation 75 in foundations and
plinth in - Cement mortar 1:4 (1 cement: 4 coarse sand). |
Sqm |
20.00 |
270.35 |
5407.00 |
| 14 |
13.1.1 / 201 |
12 mm cement plaster of mix - 1:4 (1 cement: 4 fine sand) |
Sqm |
45.00 |
77.55 |
3489.75 |
| 15 |
13.41.1 / 204 |
Distempering
with oil bound washable distemper of approved brand and manufacture to
give an even shde - New work (two or more coats) over and including
priming coat with cement primer. |
Sqm |
60.00 |
41.55 |
2493.00 |
| 16 |
12.29 / 190 |
Providing
and fixing false ceiling with 12 mm thick plain / semi perforated or
with deisgn ceilin tiles of BWP type phenol formaldehyde synthetic
resin bonded pressed particle board conforming to IS: 3087 finished
with a coat of aluminium primer on both sides & edges and two coats
of synthetic enamel paint of approved quaiaty on exposed face fixed to
a grid made out of anodised aluminium (with 15 micron anodic coating) T
sections 35 x 15 x 1.5 mm size main runners and cross srunners 23.5 x
19 x 1.5 mm fixed to main runners placed 600 mm centre to centre both
ways so as to form a grid of 600 mm square. The frame work shall be
suspended from ceiling by level adjusting hangers of 6 mm dia M.S.rod
fixed to roof slab by means of ceiling cleats. The suspenders shall be
placed 600 x 1200 mm centre to centre incuding fixing to the frame with
C.P. brace screw s and applying a priming coat of zinc chromate yellow
primer (aluminium frame work shall be paid separately). |
Sqm |
8.00 |
202.45 |
1619.60 |
| 17 |
5.3 / 79 |
Reinforced
cement concrete work in beams, suspended floors, roofs having slope
upto 15o, landings, balconies, shelves, chajjas, lintels, bands, plain
window sills, staircase and spiral stair cases upto floor five level
excluding the costs of centring, shuttering, finishing and
reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size). |
Cum |
0.21 |
3673.85 |
771.51 |
| 18 |
5.22.3 / 22 |
Reinforcement
for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete - Cold twisted bars. |
Kg |
30.00 |
42.70 |
1281.00 |
| 19 |
5.9.5 / 89 |
Centring
and shuttering including strutting, propping etc., and removal of form
for - Lintels, beams, plinth beams, girders, bressumers and
cantilevers. |
Sqm |
3.00 |
162.65 |
487.95 |
| 20 |
18.10.2 / 292 |
Providing
and fixing G.I., pipes complete with G.I., fittings and clamps,
including cutting and making good the walls etc., - Internal work -
Exposed on wall - 20 mm dia nominal bore. |
Metre |
20.00 |
133.85 |
2677.00 |
| 21 |
18.10.3 / 292 |
Providing
and fixing G.I., pipes complete with G.I., fittings and clamps,
including cutting and making good the walls etc., - Internal work -
Exposed on wall - 25 mm dia nominal bore. |
Metre |
50.00 |
179.65 |
8982.50 |
| 22 |
18.15.1 / 293 |
Providing and fixing brass bib cock of approved quality - 15 mm nominal bore. |
Each |
5.00 |
191.70 |
958.50 |
| 23 |
18.15.1 / 293 |
Providing and fixing brass bib cock of approved quality - 15 mm nominal bore. |
Each |
3.00 |
191.70 |
575.10 |
| 24 |
18.17.1 / 293 |
Providing and fixing gun metal gate valve with C.I., wheel of approved quality (screwed end) - 25 mm nominal bore. |
Each |
3.00 |
285.50 |
856.50 |
| 25 |
17.7.4 / 264 |
Providing
and fixing wash basin with C.I brackets,15 mm C.P. brass pillar taps,
32 mm C.P. brass waste of standard pattern, including paintings of
fittings and brackets, cutting and making good the walls wherever
required - White vitreous China Wash basin size 550 x 400 mm with a
single 15 mm C.P brass pillar tap. |
Each |
2.00 |
1044.90 |
2089.80 |
| 26 |
17.3.1 / 263 |
Providing
and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I.,
brackets, 40 mm flush bend, over flow arrangement with specials of
standard make and mosquito proof couping of approved municipal design
complete including painting of fittings and brackets, cutting and
making good the walls and floors wherever required - W.C. pan with ISI
marked white solid plastic seat and lid. |
Each |
2.00 |
3282.95 |
6565.90 |
| 27 |
17.28.1.2 / 267 |
Providing
and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.,
waste fittings complete - Semi rigid pipe - 40 mm dia. |
Each |
2.00 |
47.95 |
95.90 |
| 28 |
15.2.1 / 226 |
Demolishing
cement concrete manually by mechanical means and disposal of material
within 50 metres lead as per direction of Engineer-in-Charge - 1:3:6 or
richer mix. |
Cum |
0.80 |
368.45 |
294.76 |
| 29 |
4.1.3 / 79 |
Providing
and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work upto plinth level - 1:2:4
(1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size). |
Cum |
1.09 |
3257.45 |
3550.62 |
| 30 |
17.31 / 267 |
Providing
and fixing 600 x 450 mm beveled edge mirror of superior glass (of
approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers complete. |
Each |
2.00 |
493.65 |
987.30 |
| 31 |
17.10.1.4 / 265 |
Providing
and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S.
13983 with C.I. Brackets and stainless steel plug 40 mm including
painting of fittings and brackets, cutting and making good the walls
where ever required - Kitchen sink with drain board - 460 x 915 mm bowl
depth 178 mm. |
Each |
1.00 |
3482.90 |
3482.90 |
| 32 |
9.117.2 / 152 |
Providing
and fixing factory made UPVC door frame made of UPVC extruded section
having an over all dimension as below (tolerance 1 mm with all
thickness 2.00mm + 0.2mm, corners of the door frame to be mitred and
welded of plastic, galvanised brackets and stainless steel screws. The
hinge side vertical of the frames reinforced by galvanised M.S.tube of
size 19 x 19mm and 1mm + 0.1mm wall thickness and 3 nos., stainless
steel hinges fixed to the frame complete as per manufacturers
specification and direction of Engineer-in-Charge - Extruded section
profile size 42 x 50mm. |
Metre |
10.20 |
146.80 |
1497.36 |
| 33 |
9.118.1 / 152 |
24
mm thick factory made PVC door shutters made of styles and rails of a
UPVC hollow section of size 59 x 24 mm and wasll thickness 2 mm +2 mm
with in built edging on both sides. The styles and rails mitred and
joined at the corners by means of M.S.galvanised / plastic brackets of
size 75 x 220 mm having wall thicknes 1.00 mm and stainless steel
screws. The styles of the shutter reinforced by inserting galvanised
M.S. tube of size 20 x 20 mm and 1 mm + 0.1 mm wall thickness. The lock
rail madae up of 'H' section, a UPVC hollow section of size 10-0 x 24
mm and 2 mm + 0.2 mm wall thickness fixed to the shutter styles by
means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled
with a UPVC multi-chambered single panel of size not less than 620 mm
having over all thickness of 20 mm and 1 mm + 0.1 mm wall thickness.
the panels filled vertically and tie bar at two places by inserting
horizontally 6 mm galvanised M.S.rod and fastened with nuts and
washers, complete as per manufacturer's specification and directions of
Engineer-in-Charge (For W.C. and bath room door shutter). |
Sqm |
3.80 |
2190.50 |
8323.90 |
| 34 |
11.37 / 177 |
Providing
and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be
specified by the manufacturer) of 1st quality conforming to IS: 15622
of approved make in colours such as White Ivory, Grey, Fume Red Brown
laid on 20 mm thick Cement Mortar 1:4 (1 cement: 4 coarse sand)
including pointing the joints with white cement and matching pigment
etc., complete. |
Sqm |
19.00 |
598.65 |
11374.35 |
| 35 |
11.36 / 177 |
Providing
and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacture) of approved make
in all colours, shades excelpt burgundy, bottle green, black of any
make in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge in skirting, irsers of steps and
dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse
sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm including
pointing in white cement mixed with pigment of matching shade complete. |
Sqm |
6.00 |
556.60 |
3339.60 |
| 36 |
17.29 / 267 |
Providing and fixing 100 mm sand cast iron grating for gully trap. |
Each |
2.00 |
16.45 |
32.90 |
| 37 |
17.60.1.1 / 273 |
Providing
and fixing trap of self cleaning design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting
and making good the walls and floors - 100 mm inlet and 100 mm outlet -
Sand cast iron S&S as per IS: 3989. |
Each |
3.00 |
544.30 |
1632.90 |
| 38 |
17.33 / 168 |
Providing
and fixing 600 x 120 x 5 mm glass shelf with edges round of supported
on anodised aluminium angle frame with C.P. brass brackets and guard
rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
Each |
2.00 |
218.80 |
437.60 |
| 39 |
17.34.1 / 268 |
Providing and fixing toilet paper holder - C.P. brass. |
Each |
2.00 |
147.10 |
294.20 |
| 40 |
NS |
Providing and fixing telephonic health fancaet set as of approved make as per the directions of EIC. |
e |
2.00 |
200.00 |
400.00 |
| 41 |
12.40.2 / 192 |
Providing
and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS: 13592 Type A including jointing with seal ring
conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i)
Single socketed pipes - 110 mm diameter. |
Metre |
25.00 |
163.40 |
4085.00 |
| 42 |
12.40.1 / 192 |
Providing
and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS: 13592 Type A including jointing with seal ring
conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i)
Single socketed pipes - 75 mm diameter. |
Metre |
20.00 |
95.00 |
1900.00 |
| 43 |
12.42.5.2 / 192 |
Providing
and fixing on wall face unplasticised - PVC moulded fittings /
accessories for unplasticised Rigid PVC rain water pipes conformingt o
IS: 13592 Type A including jointing with seal ring conforming to IS:
5382 leaving 10 mm gap for thermal expansion - Bend 87.5o - 110 mm
bend. |
Each |
6.00 |
134.20 |
805.20 |
| 44 |
12.42.5.1 / 192 |
Providing
and fixing on wall face unplasticised - PVC moulded fittings /
accessories for unplasticised Rigid PVC rain water pipes conformingt o
IS: 13592 Type A including jointing with seal ring conforming to IS:
5382 leaving 10 mm gap for thermal expansion - Bend 87.5o - 75 mm bend. |
Each |
6.00 |
88.40 |
530.40 |
| 45 |
18.10.1 / 292 |
Providing
and fixing G.I., pipes complete with G.I., fittings and clamps,
including cutting and making good the walls etc., - Internal work -
Exposed on wall - 15 mm dia nominal bore. |
Metre |
10.00 |
105.85 |
1058.50 |
| 46 |
19.7.1.1 / 317 |
Constructing
brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand)
R.C.C. top slab with 1:2:4 (1 cement: 2 coarses sand: 4 graded stone
aggregate 20 mm nominal size), foundation concrete 1:4:8 (1 cement: 4
coarse sand: 8 graded stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand)
finished with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 20 mm nominal size) finished with a floating coat of neat
cement complete as per standard design - Inside size 90 x 80 cm and 45
cm deep including C.I. cover with frame (light duty) 455 x 610 mm
internal dimensions total weight of cover and frame to be not less than
38 kg (weight of cover 23 kg and weight of frame 15 kg) - With F.P.S.
bricks with class designation 75. |
each |
1.00 |
5383.70 |
5383.70 |
| 47 |
19.4.1.1 / 315 |
Providing
and fixing square-mouth S.W. gully trap grade 'A' complete with C.I.,
grating brick masonry chamber with water tight C.I., cover with frame
of 300 x 300 mm size (inside) the weight of cover to be not less than
4.50 kg and frame to be not less than 2.70 kg as per standard design -
100 x 100 mm size P type - With F.P.S. Bricks class designation 75. |
Each |
1.00 |
935.15 |
935.15 |
| 48 |
2.10.1.2 / 65 |
Excavating
trenches of required width for pipes, cables etc., including excavation
for sockets and dressing of sides, ramming of bottoms, depth upto 1.5
m, including getting out the excavated soil and then returning the soil
as required, in layers not exceeding 20 cm in depth including
consolidating each deposited layer by ramming, watering, etc., and
disposing of surplus excavated soil as directed, within a lead of 50 m
- Pipes, cables etc., exceeding 80 mm dia but not exceeding 300mm dia.. |
Metre |
35.00 |
115.05 |
4026.75 |
| 49 |
18.13.1 / 293 |
Making
connection of G.I., distribution branch with G.I., main of following
sizes by providing and fixing tee, including cutting and threading the
pipe etc., complete - 25 to 40 mm nominal bore. |
Each |
1.00 |
166.05 |
166.05 |
| 50 |
NS |
Providing
and fixing exhaust fan of approved brand of size 230 mm dia viz.,
Crompton, Khaitan or equivalent - 22 mm thick water proof ly wood of
size of 50 x 50 cm as per the directions of EIC. |
Each |
2.00 |
900.00 |
1800.00 |
| 51 |
17.61.1 / 273 |
Cutting
chases in brick masonry walls for following diameter sand cast iron /
centrifugally cast (spun) iron pipes and making good the same with
cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone
aggregate 12.5 mm nominal size) including necessary plaster and
pointing in cement mortar 1:4 (1 cement: 4 coarse sand) - 100 mm dia. |
Metre |
2.00 |
152.45 |
304.90 |
| 52 |
18.48 / 300 |
Providing
and placing on terrace (at all floor leels) polyethylene water storage
tank ISI : 12701 marked with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overfow pipes but without
fittings and the base support for tank. |
Per ltr |
500.00 |
5.25 |
2625.00 |
| 53 |
18.46.3 / 299 |
Providing
and fixing G.I., Union in G.I. Pipe including cutting and threading the
pipe and making long screws etc., complete (new work) - 25 mm nominal
bore. |
Each |
2.00 |
107.25 |
214.50 |
| |
|
Sub Total in Rs. |
|
|
|
170751.28 |
| |
|
Add cost index @ 14%
|
|
|
|
23905.17
|
| |
|
Total amount |
|
|
|
194656.45
|
| |
|
Total amount rounded to |
|
|
|
1,94,656.00
|
