Tender Schedule for the work of Construction of 1 Block (2GF+2FF,) Type II & 1 Block (2GF+2FF,) Type III quarters at CCRI, Balehonnur,Chickmagalore District

Sl. No. CPWD DSR 2007 Item No. & Page No. Description of Items Unit Approx. Quantity Rate in Rs. Amount in Rs.
1 2.6.1 / 64 Earth work in excavation over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed - All kinds of soil.





Type II Cum 60.00 101.85 6111.00
Type III Cum 90.00 101.85 9166.50
2 2.8.1 / 65 Earth work in excavation in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m - All kinds of soil.





Type II Cum 200.00 103.00 20600.00
Type III Cum 210.00 103.00 21630.00
3 2.10.1.1 / 65 Excavating trenches of required width for pipes, cables etc., including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m - Pipes, Cables etc.,





Type II Metre 100.00 70.45 7045.00
Type III Metre 100.00 70.45 7045.00
4 2.25 / 67 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc., in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.





Type II Cum 92.00 45.70 4204.40
Type III Cum 100.00 45.70 4570.00
5 4.1.10 / 79 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level - 1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40mm nominal size).





Type II Cum 36.00 2237.75 80559.00
Type III Cum 38.00 2237.75 85034.50
6 5.3 / 88 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15o, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases upto floor five level excluding the costs of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).





Type II Cum 78.00 3673.85 286560.30
Type III Cum 79.00 3673.85 290234.15
7 6.1.2 / 99 Brick work with F.P.S. bricks of class designation 80 in foundation and plinth in - Cement mortar 1:6 (1 cement: 6 coarse sand ).





Type II Cum 172.00 2121.75 364941.00
Type III Cum 190.00 2121.75 403132.50
8 7.1.1 / 109 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at plinth level with - Cement mortar 1:6 (1 cement: 6 coarse sand).





Type II Cum 130.00 1838.90 239057.00
Type III Cum 140.00 1838.90 257446.00
9 6.12.2 / 99 Half brick masonry with bricks of class designation 75 in foundations and plinth in - Cement mortar 1:4 (1 cement: 4 coarse sand).





Type II Cum 65.00 270.35 17572.75
Type III Cum 65.00 270.35 17572.75
10 5.9.5 / 89 Centring and shuttering including strutting, propping etc., and removal of form for - Lintels, beams, plinth beams, girders, bressumers and cantilevers.





Type II Cum 135.00 162.65 21957.75
Type III Cum 148.00 162.65 24072.20
11 5.9.3 / 89 Centring and shuttering including strutting, propping etc., and removal of form for - Suspended floors, roofs, landings, balconies and access platform.





Type II Sqm 425.00 187.35 79623.75
Type III Sqm 468.00 187.35 87679.80
12 5.22.3 / 22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete - Cold twisted bars.





Type II Kg 8500.00 42.70 362950.00
Type III Kg 9000.00 42.70 384300.00
13 11.3.1 / 172 Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of step etc., complete - 40mm thick with 20mm nominal size stone aggregate.





Type II Sqm 300.00 192.95 57885.00
Type III Sqm 332.00 192.95 64059.40
14 9.21.2 / 140 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st Class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 30 mm thick including ISI marked stainless steel butt hinges with necessay screws.





Type II Sqm 52.00 904.40 47028.80
Type III Sqm 52.00 904.40 47028.80
15 10.13 / 164 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15 x 3 mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with dash fastner or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.





Type II Sqm 507.50 51.15 25958.63
Type III Sqm 507.50 51.15 25958.63
16 10.11 / 164 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side / top / centre hung with beading and all members such as K11 B and K12 B etc., complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted with 15 x 10 x 10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessasry hinges osr pivotss complete as per approved designs.





Type II Kg 418.00 178.90 74780.20
Type III Kg 418.00 178.90 74780.20
17 6.5 / 99 Extra for brick work in superstructure above floor V level for each four floors or part thereof by mechanical means by lifting material using mobile crane.





Type II Cum 172.00 190.00 32680.00
Type III Cum 190.00 190.00 36100.00
18 6.14 / 100 Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means by lifting material using mobile crane.





Type II Cum 65.00 16.85 1095.25
Type III Cum 65.00 16.85 1095.25
19 NS Extra for using redoxide of approved brand as per the directions of EIC.





Type II Kg 75.00 100.00 7500.00
Type III Kg 80.00 100.00 8000.00
20 9.48.1 / 143 Providing and fixing M.S. grills of required pattern in frames of windows etc., with M.S. flats, square or round bars etc. all complete - Fixed to steel windows by welding.





Type II Sqm 400.00 59.25 23700.00
Type III Sqm 400.00 59.25 23700.00
21 NS Providing and fixing M.S.peg stays of 250 mm length of approved brand as per the directions of EIC.





Type II Each 72.00 20.00 1440.00
Type III Each 72.00 20.00 1440.00
22 13.1.2 / 201 12 mm cement plaster of mix - 1:6 (1 cement: 6 fine sand)





Type II Sqm 1020.00 67.65 69003.00
Type III Sqm 1020.00 67.65 69003.00
23 13.16.1 / 202 6 mm cement plaster of mix - 1:3 (1 cement: 3 fine sand).





Type II Sqm 625.00 62.15 38843.75
Type III Sqm 690.00 62.15 42883.50
24 13.2.2 / 201 15 mm cement plaster on the rough side of single or half brick wall of mix - 1:6 (1 cement: 6 fine sand).





Type II Sqm 960.00 78.55 75408.00
Type III Sqm 1000.00 78.55 78550.00
25 13.3.1 / 201 20 mm cement plaster of mix - 1:4 (1 cement: 4 coarse sand).





Type II Sqm 420.00 110.45 46389.00
Type III Sqm 420.00 110.45 46389.00
26 13.41.1 / 204 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shde - New work (two or more coats) over and including priming coat with cement primer.





Type II Sqm 1445.00 41.55 60039.75
Type III Sqm 1445.00 41.55 60039.75
27 13.44.1 / 204 Finishing walls with water proofing cement paint of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm).





Type II Sqm 575.00 30.80 17710.00
Type III Sqm 610.00 30.80 18788.00
28 13.62.1 / 206 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.





Type II Sqm 240.00 51.30 12312.00
Type III Sqm 240.00 51.30 12312.00
29 4.17 / 82 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.





Type II Sqm 65.00 222.65 14472.25
Type III Sqm 72.00 222.65 16030.80
30 13.33.1 / 204 Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) - Flush / Ruled pointing.





Type II Sqm 50.00 62.50 3125.00
Type III Sqm 60.00 62.50 3750.00
31 19.50.1.1 / 198 Providing and fixing bend of required degree with accesss door, insertion ruber washer 3 mm thick, bolts and nuts complete





Type II Each 10.00 134.20 1342.00
Type III Each 10.00 134.20 1342.00
32 12.42.4.1 / 192 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conformingt o IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - Single tee without door - 75 x 75 x 75 mm.





Type II Each 4.00 157.70 630.80
Type III Each 4.00 157.70 630.80
33 12.40.1 / 192 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes - 75 mm diameter.





Type II Rmt 45.00 95.00 4275.00
Type III Rmt 50.00 95.00 4750.00
34 12.40.2 / 192 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes - 110 mm diameter.





Type II Metre 51.00 163.40 8333.40
Type III Metre 57.00 163.40 9313.80
35 12.42.4.1 / 192 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conformingt o IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - Single tee without door - 75 x 75 x 75 mm.





Type II Each 4.00 157.70 630.80
Type III Each 4.00 157.70 630.80
36 12.42.5.1 / 192 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conformingt o IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - Bend 87.5o - 75 mm bend.





Type II Each 12.00 88.40 1060.80
Type III Each 12.00 88.40 1060.80
37 12.42.5.2 / 192 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conformingt o IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion - Bend 87.5o - 110 mm bend.





Type II Each 10.00 143.20 1432.00
Type III Each 10.00 143.20 1432.00
38 17.60.1.1 / 273 Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors - 100 mm inlet and 100 mm outlet - Sand cast iron S&S as per IS: 3989.





Type II Each 12.00 544.30 6531.60
Type III Each 12.00 544.30 6531.60
39 17.61.1 / 273 Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement: 4 coarse sand) - 100 mm dia.





Type II Each 8.00 152.45 1219.60
Type III Each 8.00 152.45 1219.60
40 18.11.1 / 292 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall - 15 mm dia nominal bore.





Type II Metre 16.00 144.75 2316.00
Type III Metre 16.00 144.75 2316.00
41 18.12.2 / 192 Providing and fixing G.I., pipes complete with G.I., fittings including trenching and refilling etc., - External work - 20 mm dia nominal bore.





Type II Metre 100.00 116.60 11660.00
Type III Metre 120.00 116.60 13992.00
42 18.13.2 / 293 Making connection of G.I., distribution branch with G.I., main of following sizes by providing and fixing tee, including cutting and threading the pipe etc., complete - 50 to 80 mm nominal bore.





Type II Each 1.00 423.29 423.29
Type III Each 1.00 423.29 423.29
43 13.18 / 202 Neat cement punning.





Type II Each 70.00 21.40 1498.00
Type III Each 70.00 21.40 1498.00
44 17.13.2 / 266 Providing and fixing white vitreous china water closet squatting pan (Indian type) - Orissa pattern W.C. pan of size 580 x 440 mm.





Type II Each 4.00 1010.85 4043.40
Type III Each 4.00 1010.85 4043.40
45 18.15.1 / 293 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore.





Type II Each 12.00 191.70 2300.40
Type III Each 12.00 191.70 2300.40
46 18.16.1 / 293 Providing and fixing brass stop cock of approved quality - 15 mm nominal bore.





Type II Each 12.00 191.70 2300.40
Type III Each 12.00 191.70 2300.40
47 18.12.6 / 192 Providing and fixing G.I., pipes complete with G.I., fittings including trenching and refilling etc., - External work - 50 mm dia nominal bore.





Type II Metre 60.00 280.10 16806.00
Type III Metre 60.00 280.10 16806.00
48 20.9.3 / 211 (Pro-rata) Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) - 25 mm nominal bore.





Type II Each 8.00 250.00 2000.00
Type III Each 8.00 250.00 2000.00
49 NS Supplying and fixing 25mm thick cuddappah stone slabs of approved quality as per the directions of EIC.





Type II Each 20.00 200.00 4000.00
Type III Each 20.00 200.00 4000.00
50 17.28.1.1 / 267 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C., waste fittings complete - Semi rigid pipe - 32 mm dia.





Type II Each 8.00 42.15 337.20
Type III Each 8.00 42.15 337.20
51 17.9.1 / 265 Providing and fixing kitchen sink with C.I. Brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required - White glazed fire clay kitchen sink of size 600 x 450 250 mm.





Type II Each 4.00 1793.35 7173.40
Type III Each 4.00 1793.35 7173.40
52 17.7.4 / 264 Providing and fixing wash basin with C.I brackets,15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the walls wherever required - White vitreous China Wash basin size 550 x 400 mm with a single 15 mm C.P brass pillar tap.





Type II Each 4.00 1044.90 4179.60
Type III Each 4.00 1044.90 4179.60
53 17.32.2 / 267 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing - Rectangular shape 453 x 357 mm.





Type II Each 4.00 465.10 1860.40
Type III Each 4.00 465.10 1860.40
54 18.48 / 300 Providing and placing on terrace (at all floor leels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overfow pipes but without fittings and the base support for tank (optional).





Type II Ltr 1000.00 5.25 5250.00
Type III Ltr 1000.00 5.25 5250.00
55 19.32.1 / 323 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design - With F.P.S. bricks (as per drawing).





Type II Each 1.00 9938.65 9938.65
Type III Each 1.00 9938.65 9938.65
56 9.96.1 / 149 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to requird colour or shade with nuts and screws etc., complete - 300 x 16 mm.





Type II Each 12.00 158.50 1902.00
Type III Each 20.00 158.50 3170.00
57 9.97.3 / 149 Providing and fixing aluminium tower bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete - 200 x 10 mm





(a) 200 x 100 mm - Type II Each 40.00 52.00 2080.00
(b) 200 x 100 mm - Type III Each 50.00 52.00 2600.00
(a) 150 x 100 mm - Type II Each 16.00 42.75 684.00
(b) 150 x 100 mm - Type III Each 24.00 42.75 1026.00
58 19.7.1.1 / 317 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab with 1:2:4 (1 cement: 2 coarses sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design - Inside size 90 x 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) - With F.P.S. bricks with class designation 75.





Type II Each 5.00 5383.70 26918.50
Type III Each 5.00 5383.70 26918.50
60 9.101.1 / 150 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc., complete - Single rubber stopper.





Type II Each 16.00 19.05 304.80
Type III Each 16.00 19.05 304.80
61 13.37.1 / 204 White washing with lime to give an even shade - New Work (three or more coats)





Type II Each 200.00 6.75 1350.00
Type III Each 200.00 6.75 1350.00
62 19.4.1.1 / 315 Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I., grating brick masonry chamber with water tight C.I., cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design - 100 x 100 mm size P type - With F.P.S. Bricks class designation 75.





Type II Each 4.00 935.15 3740.60
Type III Each 4.00 935.15 3740.60
63 9.100.2 / 150 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colur or shade with necessary screws etc., complete - 100 mm





Type II Each 56.00 35.30 1976.80
Type III Each 56.00 35.30 1976.80
64 19.6.5 / 316 Providing and laying non-pressure NP2 class(light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc., complete - 450 mm dia R.C.C. pipe.





Type II Metre 4.00 499.55 1998.20
Type III Metre 4.00 499.55 1998.20
65 17.37.1 / 268 Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron / cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc., - For 100 mm dia pipe.





Type II Each 16.00 65.35 1045.60
Type III Each 16.00 65.35 1045.60
66 NS Providing and fixing terminal guard - PVC.





Type II Each 1.00 50.00 50.00
Type III Each 1.00 50.00 50.00
67 NS Supply and fixing copper handa of approved quality as per the directions of EIC.





Type II Kg 32.00 400.00 12800.00
Type III Kg 32.00 400.00 12800.00
68 19.3.1 / 315 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W.pipes including bed concrete as per standard desigan - 100 mm diameter S.W.pipe.





Type II Metre 50.00 157.40 7870.00
Type III Metre 50.00 157.40 7870.00
69 18.22.2 / 294 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 150 mm diameter.





Type II Each 4.00 55.80 223.20
Type III Each 4.00 55.80 223.20
70 NS Supply of Mangalore tile of standard size of approved make brand viz., Sun, Kings, Hamsa, Bharat brand and placed over existing cement mortor band of specified size at 1st floor roof level as per the directions of EIC - Cost of cement mortar paid extra.





Type II Sqm 370.00 170.00 62900.00
Type III Sqm 370.00 170.00 62900.00
71 11.37 / 177 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White Ivory, Grey, Fume Red Brown laid on 20 mm thick Cement Mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.





Type II Sqm 10.00 598.65 5986.50
Type III Sqm 15.00 598.65 8979.75
72 NS Supply and fixing Mangalore ridge tile of approved size as per the directions of EIC.





Type II Sqm 20.00 120.00 2400.00
Type III Sqm 20.00 120.00 2400.00
73 18.18.1 / 293 Providing and fixing ball valve (brass) of approved quality complete - High or low pressure with plastic floats complete - 15 mm nominal bore.





Type II Sqm 4.00 228.35 913.40
Type III Sqm 4.00 228.35 913.40
74 11.36 / 177 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades excelpt burgundy, bottle green, black of any make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.





Type II Sqm 30.00 556.60 16698.00
Type III Sqm 40.00 556.60 22264.00
75 17.73.1 / 274 Providing and fixing PTMT towel rain complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour - 450 mm long towel rail with total eighth of 495 mm, width 78 mm and 170 gms.





Type II Each 8.00 294.65 2357.20
Type III Each 8.00 294.65 2357.20
76 11.13.1. 174 Providing for fixing glass strips in joints of terrazo / cement concrete floors - 40mm wide and 4 mm thick.





Type II Rmt 300.00 17.60 5280.00
Type III Rmt 325.00 17.60 5720.00
77 NS Supply and fixing M.S.handle of approved make as per the directions of EIC.





Type II Each 72.00 15.00 1080.00
Type III Each 72.00 15.00 1080.00
78 Pro-rata item Making cement mortor band of average size (50 x 30)mm over 1st floor roof to place the Mangalore tiles as per the directions of EIC.





Type II Rmt 970.00 20.65 20030.50
Type III Rmt 1000.00 20.65 20650.00
79 13.29.3 / 203 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand) - Raised Band





Type II Cm per metre 480.00 2.05 984.00
Type III Cm per metre 500.00 2.05 1025.00
80 9.21.3 / 140 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 25 mm thick (for cup board) including ISI marked nickle plated bright finsihed M.S. piano hinges with necesary screws.





Type II Sqm 21.00 853.05 17914.05
Type III Sqm 21.00 853.05 17914.05
Electrical Works (Specification & Rates are as per CPWD Electrical DSR 2007)
1 WGPVCPT 1.8 / 2 Copper wiring in PVC conduit: wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sqm PVC insulated, copper conductor cable in surface / recessed PVC conduit as required - Group "A"





Type II Point 92.00 264.00 24288.00
Type III Point 112.00 264.00 29568.00
2 WGPVCP 4 / 3 Wiring for light / power plug with 2 x 4 Sq.mm. PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 number 2.24mm dia bar copper wire for loop earthing as required - Copper plug point wiring in PVC conduit (2 x 4 Sq.mm): `




Type II Metre 104.00 97.00 10088.00
Type III Metre 130.00 97.00 12610.00
3 WGPVCSB 1.14.2 / 4 Wiring for circuit wiring with 2 x 2.5 Sq.mm PVC insulated, copper conductor, single core cable in surface / recessed PVC conduit as required - Copper circuit wiring in PVC conduit (2 x 2.5 Sq.mm)





Type II Metre 110.00 81.00 8910.00
Type III Metre 140.00 81.00 11340.00
4 PPACCMOD 132 / 9 S/F power plug point accessories: Supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 3 pin 15/16 amps socket etc.,





Type II Each 12.00 214.00 2568.00
Type III Each 16.00 214.00 3424.00
5 BRHOLD 1.34 / 10 S/F brass holder: Supplying and fixing brass batten / angle holder including connections etc., as required.





Type II Each 24.00 33.00 792.00
Type III Each 24.00 33.00 792.00
6 CALLBELL 1.38 /10 S/F call bell / buzzer: Supplying and fixing call bell / buzzer and piano type bell push, suitable for D.C/A.C single phase, 230 volts, complete as required.





Type II Each 4.00 26.00 104.00
Type III Each 4.00 26.00 104.00
7 NS Supplying and fixing tube light fitting i.e., connections etc., as required as per the directions of Engineer in Charge - Cost includes supply of 4 ft tube light.





Type II Each 16.00 250.00 4000.00
Type III Each 16.00 250.00 4000.00
8 SPMCBDBCO / 2.32 / 16 S/F MCB consumer unit: Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 volts, on surface/recess, complete with thinned copper busbar, neutral busbar, earth bar, din bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, interconnections, phosphatized and powder painted including earathing etc., as required. (But without MCB / RCCB / Isolator).- 2 + 4 way





Type II Each 4.00 559.00 2236.00
Type III Each 4.00 559.00 2236.00
9 B MCB BB 2.51.2 / 19 S/F DP MCB ISOLATOR; Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB -DB complete with connections, testing and commissioning etc., as required.





Type II Each 8.00 171.00 1368.00
Type III Each 8.00 171.00 1368.00
10 MCBB 2.51.1 / 19 S/F 5A to 32A L Series MCB: Supplying and fixing 5 amps to 32 amps rating 240 volts, 'L' serie, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc., - 32 SPMCB





Type II Each 24.00 86.00 2064.00
Type III Each 32.00 86.00 2752.00
11 METDB35x35 1302/28 S/F Metal board 35 x 35 x 6mm: Supplying and fixing wall mounted metal board of welded construction, fabricated with minimum 35mm x 35mm x 6mm angle iron frame work with 25mm x 6 mm flat iron as intermediate members including painting etc., as required.





Type II Sqm 1.00 900.00 900.00
Type III Sqm 1.00 900.00 900.00
12 NS Supplying and fixing 20mm thick teak wood plank in the existing angle iron board for fixing TNEB meter in and eat outs etc., as required.





Type II Sqm 1.00 900.00 900.00
Type III Sqm 1.00 900.00 900.00
13 NS Supplying and fixing the following switch gear in the existing angle iron board - 32A SPNSFU (rewirable) CAT-B





Type II Nos 4.00 750.00 3000.00
Type III Nos 4.00 750.00 3000.00
14 NS Supplying and fixing the following rating cut outs in the existing teak wood board.





(a) 32A SPNSFU (rewirable) CAT-B





(b) Earth link with bolts & nuts.





Type II Nos 4.00 100.00 400.00
Type III Nos 4.00 100.00 400.00
15 EARPIPCHAAR 3.2 / 23 GI earth pipe electrode: Earthing with G.I., pipe 4.5m long x 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrrangement and watering pipe etc (including charcoal and coke & salt) but without charcoal or coke and salt) complete as required.





Type II Set 4.00 1971.00 7884.00
Type III Set 4.00 1971.00 7884.00
16 NS Supplying and fixing 48" or 1200 mm ceiling and regular of approved brand viz., Orient PSPO as per the directions of Engineer in Charge (heavy duty).





Type II Nos 16.00 1300.00 20800.00
Type III Nos 16.00 1300.00 20800.00
17 NS Supply and fixing ISI exhaust fan of approved make & brand of 23 cm dia viz., Crompton / Philips or equivalent brand as per EIC.





Type II Each 4.00 950.00 3800.00
Type III Each 4.00 950.00 3800.00
18 EARCUWRPIP 3.16 / 23 P/F 4 mm copper earth wire in pipe: Providing and laying earth connections from earth electrode with 4mm dia copper wire in 15mm dia G.I., pipe from earth electrode as required.





Type II Metre 16.00 111.00 1776.00
Type III Metre 16.00 111.00 1776.00
19 EARCUWRSUR 32 / 23 P/F 4.00 mm Copper loop earthing wire in surface/recess: Providing and fixing 4.00mm dia copper wire on surface or in recess for loop earthing as required.





Type II Metre 40.00 49.00 1960.00
Type III Metre 40.00 49.00 1960.00
20 NS Supplying and fixing 2 Nos., 32A nuts with a suitable wooden plank on pole as aerial base as required.





Type II Set 4.00 200.00 800.00
Type III Set 4.00 200.00 800.00
21 NS Supplying & fixing CFL lamps as per the instructions of EIC for bulked head fittings.





Type II Each 8.00 100.00 800.00
Type III Each 8.00 100.00 800.00
22 7900 / 42 CPWD DSR 2007 of civil works Supply of FPS, bricks of class 35 designation and laying the same over the cable as per the directions of EIC.





Type II Nos 500.00 2.05 1025.00
Type III Nos 500.00 2.05 1025.00
23 NS Supply and laying aluminium armoured underground cable of size 2 x 16 Sqmm of Gloster / CCI / Galvanised of approved make as per the directions of EIC.





Type II Rmt 150.00 100.00 15000.00
Type III Rmt 150.00 100.00 15000.00
24 1550 / 47 Supply & fixing 50 mm GI pipe to protect the underground cable.





Type II Rmt 20.00 150.00 3000.00
Type III Rmt 20.00 150.00 3000.00
25 NS Providing and fixing industrial type of tube light fitting of approved brand and manufacture as per the directions osf EIC.





Type II Each 4.00 800.00 3200.00
Type III Each 4.00 800.00 3200.00
26 PTSWEB / 1.23 / 7 Supply and fixing 5 Amps plug point with switch.





Type II Each 64.00 17.00 1088.00
Type III Each 64.00 17.00 1088.00
27 NS Supply and fixing 40 Waats bulb of approved brand as per the directions of EIC.





Type II Each 28.00 14.00 392.00
Type III Each 28.00 14.00 392.00
28 NS Supplying and fixing single phase bus bar including supply of covering box as per the directions of EIC.





Type II Each 1.00 800.00 800.00
Type III Each 1.00 800.00 800.00
29 NS Liaison charges to getting servicing for the building from electricity department charge, including registration and documentation (excluding cost of deposit).





Type II Each 4.00 1500.00 6000.00
Type III Each 4.00 1500.00 6000.00
Sub Total in Rs.


5211643.63
Add cost index at (106 - 100 % 100 ) x 100 = 6%


312698.62
Total amount in Rs.


5524342.25
Total amount rounded to in Rs.


55,24,400.00





Sd/-
ESTATE OFFICER
  1. I Abide by all the tender conditions enlcosed with this schedule vide No. Adm/Engg/CCRI -SQ/2008/291 dated 6th Oct 2008 (as per the conditions of Notice inviting tender) and I am well aware of the same.


  2. I agree to execute the above work at _____% ( Percentage) ABOVE / BELOW.


    3. a). EMD Particulars:
    i) Drawn on branch______________________________

    ii). Demand Draft No. ______________________________

    iii). Amount in Rs.______________________________

    TENDERER